Front, side indicator and puddle lamp lens screws

For anyone that needs to know the type and size of screws on the front and side indicator and puddle lamp lenses, they appear to be a 6x32UNC screw in stainless steel from the factory. The two that hold each front lens are 1 1/16" long. 518800 The side lenses 3/4" long. 515059 Puddle lamp 5/16" long. Cannot find a listed part number for this. As mentioned all appear to be in stainless steel for ovious reasons. Not sure if any other screws on the vehicle are this same size or if any other screws or bolts were factory issued in SS? Would also like to know where SS screws or bolts are nowdays recommended to be on the vehicle? Sill cover plates for example. Its great at least that the factory did appear to have issed SS screws. It would make good sense to have a list we can keep adding to with all the screw/bolt sizes on the vehicle and in what material etc. In Australia its getting hard to find anything off the shelf in 6x32 UNC, let alone in SS. This type of screw here is mostly now used to hold domestic power points to their wall brackets. Found some 1/4" on flea bay here at around $7 for 20. Which seems reasonable. Store seems to be local in QLD. Link below: stores.ebay.com.au/fastenerkitsonline?_rdc=1 Items in fastenerkitsonline store on eBay ... Store home stores.ebay.com.au

This could come in handy for some. Keep an eye on the TV on Monday 6th Nov when 28 Stags will carry the Jockeys, Trainers and Emirate girls in the Melb Cup Parade starting around midday. This is the third year I have organised Stags for the parade. A purrfect car for this occasion. Did anyone see the two red Stags from last year’s parade on the CH10 news on Wed night? Annette saw it and I was too slow getting to see it.